Quote:
Originally Posted by duxthe1
If I'm remembering correctly on that model it's not a pressure switch, it's a pressure sensor. As such you won't be able to jumper it. The ACC is going to need to see a value that it interprets as sufficient pressure to engage the compressor. Do you have a gauge set to see what your pressure is in the system?
|
Yes, I have a gauge set attached to the low pressure side. Pressure on the low (suction) side is 80psi. I haven't been able to locate a high side port to connect to though, so I was going to rely on the a/c diagnostic display.
Christine