Quote:
Originally Posted by ThePhoenix
I have voltage to the monovalve no matter where the switches on the dash are set to.
|
That's correct and normal. If you set the temp control to "min" (18?) one of the pins should then be
grounded to close the valve; at that point one pin will have ~13 VDC and one will have ~0 VDC. (for access either slide the connector up a little, or pop the cover off with your eyeglass screwdriver)
__________________
James Marriott
2003 Buick Regal
1983 300D (228k, frau Auto)
1996 Suburban K2500 (192k, 6.5 turbo diesel/4WD towmaster 10,000)
www.engineeringworks.biz
1987 300SDL junker 170k
1982 300SD junker, 265k