Quote:
Originally Posted by LandYaghtLover
Well for now, until I know for sure, I cut some fuel hose the long way and wrapped it around. Four worm clamps later its holding until I can get proper line replacement.
When I took the rubber retainer off the fuel sprayed out n such a fine mist that it evaporated before it could touch the ground. Of all the lines, only this one was rusted and it was bad.
|
If you can open and depressurize the system then let it drain so it's not constantly dripping, you can get the stick of Permatex gas tank sealer epoxy, work it together then form it into a sheet that you can wrap around the leaking section of the line, if you can let that cure without fuel washing it off it will hold for a good long time. It's quick and dirty but it will work till you can do it right! Good Luck! And keep a fire extinguisher handy!