Well...I think I found the culprit for the seat not lowering on the right side. Although the cable was still nice and square, where it was fitting into near the gear side was spinning in there and not turning the gears. I took out the cable, took off the guide tube, put it on my drill, stuck it in deeper (that's what she said), and it moved the gears! So then, I did the shorten of the tube method so each end stuck in plenty far. Hope this solves the issue when I reinstall into the car. Now, just gotta stuff some padding in and reinstall and I'll hopefully be a cappy hamper! Thanks for the help. I'll post some pics before I put back in.