Quote:
Originally Posted by sptt
Christine,
In my 300E, it engages Drive and Reverse a little harshly (jumps). Then it is fine shifting and driving (186k on it), etc. I am told this is a worn brake band/piston engagement issue. Do you know with your expertise if I can repalce these parts on this transmission in the car but dropped down or do I need to take the whole thing out to do it? I can't seem to find anyone brave enough to just try the part replacement for me even though I'm willing to pay and i don't have the tranny jack to do myself  Sorry to interupt your thread. You can email me at sptt144@aol.com if you have an idea about this.
Thanks,
Steve |
Steve,
I am a far cry from an expert, but here is what my manual states regarding your transmission's symptoms:
HARSH ENGAGEMENT WHEN SELECTING "D" OR "R":
Idle speed too high. Check pressure receiving (pick-up)
piston in valve body for ease of operation and correct installation.
Replace valve body (if necessary).
NOTE: Pressure pick-up requires a running period of approximately
2 seconds. Harsh engagement may occur during repeated shifts
between "N" and "D". If harshness takes place within 2
seconds, condition is considered normal.
Hope this helps.
Christine