|
You won't lose a terrible amount of fuel, mostly a portion of what's in the filter and some pressure leak. You can loosen then retighten the fuel cap, which will help if there is any pressure in the tank.
There were a few variations from model to model, but I don't believe yours used any clamps. If so I would reuse them, MB uses excellent hardware. You will need to loosen the screws on the strap on each side of the filter, usually not a problem. You'll need a couple copper washers for the banjo fitting. You wil get a small amount of fuel when you loosen the first fitting, due to pressure in the lines. Protect your eyes at all times and wear ratty clothing.
HTH
Gilly
|