Quote:
Originally Posted by Biodiesel300TD
It your wiper mounts like the older ones, it has just one nut holding it onto the rotating thing(for a lack of better terminology). Is the nut on tight enough. It sounds like if the resistance it too high, meaning no water on the windshield, the rotating part of the motor brakes loose from the wiper and spins.
|
There are 4 bolts holding it on at the base. I put them on pretty tight, but not overly so. Even at snug, to tight, it wouldn't make a difference at all. All the bolts do, is prevent the wiper assembly from being too loose. Even if super tight, it would only hold it 1/10,000 of an inch tighter to whatever it attaches to.