yes all of the switches are replaceable,its not that complicated to remove center console,just lift the small carpet piece,there is just 1 bolt that you need to remove,then the wooden console lifts right up,you will need to apply the foot break,then the center plastic piece will lift up,and the console will lift and you will be able to remove it off around the shifter knob,then just pull the old switch up and out,wiggle it a bit,then just reverse the order,push in the old switch,then slide the wooden console back over shifter knob,then last push the plastic trim around shifter to finish the trim,then retighten the bolt,and place the small carpet piece back in place or the center sonsole glove compartment that you have.good luck