It didn't fix the problem. However, I had much more crud in it then the tutorial picture showed. Also, I found something that could be the culprit: There was a sticky substance-most likely that pop my son had in the car last week. BUT, there wasn't ANY of it on the front window part of the switch, just the back window switch, which works fine.

I tried using the passanger side switch to roll the window up but that didn't work for either f or b window-different part, I know.

So, for now I have 2 questions b/c I HAVE to leave soon(with or without this car). #1 would be the most important for now.

1. Is there a way to get the window up without taking a bunch of things apart (I remember reading something about jumping from the down wire to the up or something like that.) Can I do something anything?

2. How do I check the switch itself to see if it's bad? I have a multimeter. Please be specific on this-I can do most anything but I don't know most technical terms for things(I know OMS & know I need to probably ck continuity but don't really understand it & wouldn't have a clue how to do it on this.

Thanks!