I took it for a drive today. It makes the noise while turning; I tried revving it again once more and it didn't make the noise then, but it still makes the noise while turning. It sounds like it is coming from the middle or rear of the car.
I did try jacking it up and taking the rear wheels off. When I try to move the rotors by hand, I hear a very light "clunck" noise that, under very gentle spinning, prevents the rotors from spinning further. also, the noise is much louder when making left turns than right turns.
I am thinking I could have a bad transmission mount(s), bad CV joints, bad bearings, or any combination thereof.
Quote:
Originally Posted by sixto
Check the crank damper. Does it wobble with the engine running?
|
It does not wobble. This damper was also replaced last year. The entire engine itself wobbles slightly at idle(< 2 mm), but the motor mounts were also replaced last year.
Quote:
|
Remove the belt and check all the pulleys.
|
Tried that and they are good.