I haven`t used the battery yet on the seats. Iam assuming it should work though. there have been some good seat that I have had to leave because I wasn`t able to get to the rearbolts.
should be able to jump to the seat connectors to get them to move.

I have used it on a 300CD to remove all 4 window regulators, and on a 300TD. I just learned this from a couple guys that I run into all the time at the yards that e-bay stuff. on of them is on Benz World.

The battery I use is a DeWalt. I cut off some connectors that will slide onto the flat spades on the battery. and then use the test wires from a Harbor Freight $3.00 multi meter. of course I had to sacrifice the leads for the jumper wire, cut, soldered and slid on some heat shrink tubing.

Think I paid $19.00 for the battery at a used tool store, didn`t include the charger, so have to get that. $25.

Charlie

__________________
there were three HP ratings on the OM616...

1) Not much power
2) Even less power
3) Not nearly enough power!! 240D w/auto

Anyone that thinks a 240D is slow drives too fast.

80 240D Naturally Exasperated, 4-Spd 388k DD 150mph spedo 3:58 Diff

We are advised to NOT judge ALL Muslims by the actions of a few lunatics, but we are encouraged to judge ALL gun owners by the actions of a few lunatics. Funny how that works