Quote:
Originally Posted by rgnprof
|
Hi Ryan,
That's the Klann-clone type and the plates fit neatly on the 107, front and rear springs, however as mentioned by other members the compressor will not fit through the LCA hole on the front springs but are perfect for the rear.
To use the compressor on the front springs you will need to insert it from the top spring perch on the subframe and to do this you need to drop the subframe on one side to allow acces.
The plates can also be used with a steel rod to secure the spring to LCA when servicing ball joints, bushes etc. It works a treat!
Just one point to consider is that these type of compressors come in several steel configuration and the grey steel contains higher proportion of carbon making it stronger than the one you show.
