Quote:
Originally Posted by Billybob
From reading your posts it seemed that the memory functionality of store seat/steering wheel positions and then recalling and implementing those stored position was inoperative, perhaps I've mis-read the saga! If either memory controller is faulty the ability to store, recall, and reposition the seats and wheel is usually impaired. If your memory functionality is operative then most likely you have an intermittent problem and often times that is a wiring or grounding issue.
|
If they worked I would have not started this thread!
But they way I read your original response was that if the seats did not function correctly (manually operate controls) then the memory would probably not work either. And thats the conundrum. Both seats operate fine with controls, but both lack memory functions. So I can adjust them all I like, I just can not get either to program to memory. Which, if its all one unit, is rather odd. Even more odd that both would fail since both seats are independent of each other.
Make sense and do you see why I am so confused on getting this repaired? If I has spares I could swap the controllers out. But I don't.
If they are indeed shot and no one has any more ideas, then I will have to go on the hunt and spend some cash on replacement controllers. Which is fine. I just prefer to exhaust all possible solutions for repair before replacement.