WOW! You guys are really over-thinking this. A good pad installed properly will bed in quickly with little more than a few moderate applications at speed. My test drive loop is right at 2 miles, typicaly with traffic. I never have any problems bedding in new pads within that 2 miles.

The single most important thing to note about breaking in new pads is that hard aggressive braking before bed-in will overheat and glaze the rotors as well as crystalize the pads.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff