View Single Post
  #1  
Old 11-11-2010, 05:50 PM
muleears's Avatar
muleears muleears is offline
Old MB Driver
 
Join Date: May 2006
Location: Windsor, VA
Posts: 1,435
Just installed my new K1 + K2 springs from the Superior Shift Kit

What a difference! It was worth the cost of the kit ($58) just for those two springs and the instructions. The car (83 SD) no longer flares at all on the 2>3 shift, I picked the middle setting for firmness and it was perfect. I now no longer have a "too soft, lazy" shift into 4th.

I must say though, if I had to do this based solely on their instructions I could not have done it. They may make sense if you work on tranny's for a living, I don't. It took some reading time here and elsewhere to figure it out, but it was worth it. If you knew what you were doing, you could do the K1 and K2 springs along with a fluid/flush. Adding the spring work only adds about 10 min. tops. I am very pleased with the result, my tranny shifts as it should. I should have taken pics but I didn't want to risk getting ATF on the wife's digital
__________________

Muleears
'07 E320 Bluetec 133K my DD
'04 Jaguar XJ8 VDP, 34K
'10 Hyundai Accent 60K Grocery Getter
'02 VW Golf soon to be on the road again
'97 E300 Diesel Son's DD
'61 VERY tolerant wife

Hampton Roads, VA USA

Gone but not forgotten:
'67 250S 95K
'86 300SDL
'87 300D Turbo, 364K! R.I.P.
'98 E300 Turbodiesel, 213K
'02 S420, 164K
'01 Prius 138K
Reply With Quote