Here's what Tony @ Bekkers responded with:
Quote:
|
The 2.3-16V stroker engine with 10.8 CR, 276 cams should deliver 235HP@ 6800RPM at crank, 192HP at rear wheels. If the car is not attaining these ratings check a variety of things, such as air-fuel ratio at WOT ( through oxygen sensor) ignition timing 28-29 degrees, cylinder compression test (220lbs) and leakdown test, cam timing, valve clearance, spark plug gap,etc.
|
Oh well, back to the drawing board... It's time to fine tune...
I just didn't understand why both mine and my friend's stroker showed similar "gains" from different head technicians...
__________________
92 W124 300TE -- new to the family
85 W460 300GD Biodiesel -- going and going
98 W210 E300 Biodiesel -- 200k and going
86 W201 190E 2.6 stroker 16V -- RIP
http://www.190revolution.net