An update. Decided this AM not to let my mistake turn to an easy out by using another hub. Tried the Dremiel tool to cut away some of the race without major success. Then got the air chisel out to see if it could be broken of pieced out. Again no success. That German steel is damn solid metal.

By this time started to get Teed-off at it and took a torch to the hub. Heated it until red hot then punched out the inner and outer race. Took some time to do it and a hour for the hub to air cool down but they are out. Now to start once again, but this time knowing which end is first.

Thanks for your confidence building all!!

Gympie