Quote:
Originally Posted by ConnClark
Actually I want the breather hose routed through inside of the air cleaner. I want the ram air pressure from the intake going into the breather inlet in the lid. If you don't it can vent out the breather inlet.
On the 85 cali the air flows from the breather inlet in the cleaner housing and flows across the tee from the crank case vent tube and into the exit tube that goes near the inlet of the turbo. It helps increase the vacuum in the crank case similar to a Venturi Siphon.
|
But unfortunately lets a fair amount of oel into the intake tract
On mine I used the fed oil seperator cut from the aircleaner 49 state rattlecan and am going to run the out tube down to the accordion hose port-So it will still have that effect-just No oilline running to the lid or intake hose.
I would also like to use a steel radiator top tank on my radiator with a pressure cap and get rid of the big oveflow tank for a smaller one.but that is for different diabolical modd reasons.-not trying to get out of paying big$ for a replacement filter-That reminds me.