Quote:
Originally Posted by nhdoc
A better thing to do than spend the money on a new transducer is replace the two little vent filters on the ends of the vent lines...those are what let the schmutz in and can cause CEL's on their own if they have any resistance to flow at all. They run about $10 a piece but should be replaced every 5 years or so.
|
Thanks nhdoc for the suggestion.
Is there a part number for the vent filters, I can't find the part on fastlane. Also, noticed the vent filter is held down by plastic tie which I assume must be cut to remove the filter. Is there a part number for the plastic tie?