Quote:
Originally Posted by panZZer
Bare metal epoxy primer first-followed by urethane primer-Then glaze the pits with glazing putty--Or do them first with epoxy putty on the bare blasted metal-I like marine tex because it sands easy but any hardware store-jb weld stuff would work. I just would not use The kind with two "taffy strips " that you knead together.
Is that my old fiero?
|
There are actually two fieros in the picture. The 10,210 mile barn find 84 in the foreground. And the grandfather bought new 88GT 5speed next to it. There is also an 87 3800 Supercharged in the same room.
Okay, thanks for the priming tips. JB weld on bare metal as a pit filler for the welds, that could work.
I'll get some better pictures tomorrow.
I am thinking about leaving the sealing to the body guy, I may leave even the filler work to him if he won't charge me and arm and a leg.