View Single Post
  #1  
Old 01-17-2011, 08:13 PM
babymog's Avatar
babymog babymog is offline
Loose Cannon - No Balls
 
Join Date: Jan 2006
Location: Northeast Indiana
Posts: 10,765
FS OM603 Injection Pump, Turbo, & Cylinder Head (plus other parts)

Time to clean the garage.

OM603.96 Injection Pump. Came from my car ('87 300D), started well, idled well, ran well. NOT a junkyard pull with un-known history, was not run on alternate fuels (WVO etc.). A little dirty on the outside, but capped before removal to keep the DVs etc. clean as you see it. 603 070 10 01 / PES 6M 55C 320 RS 157
$325 + shipping.

OM603.96 Cylinder Head. Still on the car, you can see/hear it run if you want before I pull it. It is a #14 head with no issues, I'm going to install a new head I bought so that I am more comfortable with the additional power that I hope to develop in this engine. Includes pre-chambers, valves, glowplugs, and of course the proper cam-tower caps w/ bolts. No coolant loss, no pressurization problems, clean smooth idle.
$450 + shipping.

OM603.960 Turbo, like new remanufactured witn only a few miles since reman (Garrett/Mercedes reman, not mcparts reman). .50 trim Garrett T30 w/ ARV as originally installed.
$395 + shipping.

Pictures will follow.
Attached Thumbnails
FS OM603 Injection Pump, Turbo, & Cylinder Head (plus other parts)-p1080001.jpg   FS OM603 Injection Pump, Turbo, & Cylinder Head (plus other parts)-p1080003.jpg   FS OM603 Injection Pump, Turbo, & Cylinder Head (plus other parts)-garrett-50a.jpg   FS OM603 Injection Pump, Turbo, & Cylinder Head (plus other parts)-garrett-50b.jpg  
__________________

Gone to the dark side

- Jeff

Last edited by babymog; 01-31-2011 at 11:31 PM.
Reply With Quote