Quote:
Originally Posted by jt20
That is not a stock connection. Make sure there is a clamp on the ALDA fitting for that 'Y'.
Regardless, find the switchover valves like the ones in the diagram and you should have your answer. Pull a vacuum on the lines at the switchover valves to see which one corresponds.
If the line was routed properly, it does not go into the cabin.
|
There were three metal clamps but one fell off while taking the photo. I'll use a small nylon wire wrap as a replacement unless someone advises against it.
On my car the switchover valve is mounted next to the vacuum amplifier and gets it connections from the vac amp.
Looking at the vac lines in the FSM everything is properly connected on my car except that additional line that I've asked about.
I guess I'll put the mighty-vac on it and see what I find.