|
Thanks for the excellent pics.
Bend the part in pic #5 back into shape.
See Pic; put a piece of Angle Iron shown in Red on the Pic.
If you want you can also us another thinner piece of Angle Iron shown in Brow to reinforce the part.
You can use JB Weld Epoxy or Epoxy Putty if the surface is not eve along with maybe one Rivet per bend on the Red Angle Iron.
Or some light Tack Welds if you have a Welder.
The Brown reinforced area may be better of just being epoxied un less you want to use the one of the same rivets that goes through the Red Angle Iron.
After that go easy on the Window when going up or down.
__________________
84 300D, 82 Volvo 244Gl Diesel
Last edited by Diesel911; 02-23-2011 at 12:02 AM.
|