View Single Post
  #4  
Old 03-05-2011, 09:16 PM
frankengrant frankengrant is offline
Registered User
 
Join Date: Dec 2010
Location: AZ/CA
Posts: 256
I looked at the DIY of removing the dash... far past what I can do at the moment, I need to practice that for sure before I attempt it.

What about this?

http://www.peachparts.com/shopforum/showpost.php?p=2276677&postcount=18

Quote:
Originally Posted by snookwhaler View Post
I did not take any pics when I did this. I was pretty hot out and I just wanted to get it over with. It was not nearly as accessible as the truck. I could only really feel part of it. It was every bit as dirty as the truck and I went in the same way (through the blower fan hole). Basically you just remove the lower passenger kick panel, unplug and remove the fan and go to work.

I just used a mild solution of soap and water with my pump up sprayer, along with an old toothbrush. I dragged the big stuff down to the bottom of the coil and then wiped it out. Then I just blasted the thing with a hose. It worked very good and some of that old musty car smell is gone. Took about 1 hour from start to finish. It blows much harder than before.
Reply With Quote