Quote:
Originally Posted by tangofox007
If vice grips will work, why won't a wrench work?
|
Not enough clearance between the bolt head and the neck part of the housing. A very thin box wrench would probably work, open end as well if the jaws are thin. The needle nose vice grips got aboout 1/8 turn at a time IIRC. I was also limited on tools and doing the job out in the street, in hindsight I imagine there were a lot of easier ways 
__________________
TC
Current stable:
- 2004 Mazda RALLYWANKEL
- 2007 Saturn sky redline
- 2004 Explorer...under surgery.
Past: 135i, GTI, 300E, 300SD, 300SD, Stealth
|