|
Here is mini DIY as promised.
NOTE: some pics shown are quick photoshop pics from/of the finished product.
You'll need a dremel with steel cutting blade & long nose pliers.
pic1 - make template of the chrome reflector.
pic2 - template of chrome reflector.
pic3 - use dremel & cut/remove the "4" tabs indicated by red arrows.
pic4 - 4 tabs removed, all you see is the lip around the reflector.
pic5 - center smaller yellow reflector over template.
- use marker, mark the "6" cut lines on the lip.
- black out the "2" notch areas to be removed later.
|