Quote:
Originally Posted by Lowflyingbird
I'm thinking of springs from a S500-600 to replace the 320 springs in mine. I already see that the 420 uses the same as mine. Someone else on this forum must have done this???
|
The spring part is calculated from a numbering system, where
you add up all the equipment your car have, to find out
which spring/pad, that are correct for you car. Engine
size is also in that chart. You have to do this in EPC.
Follow that, and you'll be fine. At least, that will be the correct starting
point, for figuring out if a different pad is needed or not.
br,
syljua