Thread: W123 rear subframe bushing orientation.
View Single Post
  #8  
Old 03-19-2011, 04:15 PM
Stretch's Avatar
Stretch Stretch is offline
...like a shield of steel
  
Join Date: Sep 2009
Location: Somewhere in the Netherlands
Posts: 14,461
Quote:
Originally Posted by Blackstack View Post
Yes, thanks. The bushing is basically at a 45 degree angle to the fore and aft of the vehicle then. That's how mine came out too but I just wanted to make sure someone didn't replace them previously and install them wrong.
Good luck - you'll see the same orientation in the FSM too (I've just checked)
__________________
1992 W201 190E 1.8 171,000 km - Daily driver
1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone
1965 Land Rover Series 2a Station Wagon CIS recovery therapy!
1961 Volvo PV544 Bare metal rat rod-ish thing

I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior



Don't leave that there - I'll take it to bits!
Reply With Quote