Most people overthink it. Center the rod against the rear of the hole. Pull the black clip out of the cable until it clicks in place. Gently slide the clip over the rod and lower it. It should just fall into place. Rarely takes me over two tries. Once you have the cable lowered over the rod pull the free end to feel if the spring pressure is present from properly engaging the rod. Finish installing if it is.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff