View Single Post
  #1  
Old 03-24-2011, 07:39 PM
luke4's Avatar
luke4 luke4 is offline
benz-o-matic '86
 
Join Date: Mar 2011
Location: North San Diego County, CA
Posts: 60
Source of Turbo Boost Problem OM603, 300SDL

Hey guys, thanks in advance for your help.

0-60 time is about 13.5 seconds, not bad, but slower than I want.

Turbo produces 10-11 PSI (WOT, under load, 4k RPM), spins by hand, no play.

Removed ALDA. Lots of black smoke above three quarters throttle above 3K RPM.

Wastegate door moves fine (when disconnected), actuator actuates with compressed air.

New aircleaner, clear passages to turbo fresh air inlet (door under aircleaner opens fine).

EGR disabled, cat cleaned out. Cat was pretty plugged up.

Noticed that there is a some black sludge in the intake manifold when I removed the ALDA fitting and a plug.

Did a diesel purge, changed filters. There's some crud collecting in the primary filter. But I think that's a separate issue from my low boost.

What else can I check?
__________________
1986 300 SDL, gray on black, #14 head, 180K miles
1982 300 CD, silver on palomino, 290K+ miles [sold]
1980 300 SD, white on palomino, 500K+ miles when retired [uncle's car - inspiration for the above]
Reply With Quote