As a 15 year MB mechanic, I've never used a dial indicator to set front wheel bearings. If you're trying to set them that precise, I'll bet you are also setting them too tight.

With pliers, snug the locknut about 1/4 turn past 0 clearance. Back off until it's loose again. By hand, advance the locknut to 0 clearance then back it up ~8mm and lock it.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff