There is a cam plate assembly that needs to be transferred from the old part. It's a plastic plate about 8mm thick and resides between the ign switch and the lock housing. Have the two steering locks side by side before you begin. I's very easy to confuse the plate's orientation so it is best to transfer it immediately to the awaiting new part. You can confirm its operation by observing the metal contact for the cable release moving outward as you turn the key.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff