Okay, so I bought the Curt 11806 hitch and their wiring adapter for my 1994 E320T. The hitch is very well made and the kit would have gone in like a dream if I had properly aligned the holes I drilled. The installation instructions say to budget 40 minutes for the install, but that surely didn't include dismantling the panels in the rear compartment. I would say it took a good two hours overall.

Now for the wiring: I would like to pull the signals from the connector for the taillights that is located inside the spare tire well. Does anyone have a pinout for this connector? Also, has anyone developed a way to parallel the signals in a Mercedes connector so I don't have to cut into the stock harness?

Thanks in advance.

Best Regards,
Rob

__________________
Robert Fini

'12 ML350 BlueTec, 111k
'06 E320CDI (x2)
'05 T1N Sprinter 2500/Pleasure-Way Plateau TS, 72k
'97 C36AMG, 325k (son's)
'94 E320T, 249k
'93 190E Sportline LE, 168k (daughter's)
'84 190E-2.3/5spd (Stage Rally Racer)
'66 230 W110 Sedan (Barn Find, Vintage Racer build in progress)