TD is the engine RPM signal and 87K I believe is supposed to be the normally closed (not connected) contact of the relay. Doesn't make much sense for the gasser relay to operate without an RPM input. FWIW, the only material diference I am aware of in the function of the relay is that there is an extra cutout switch on the throttle of the diesel. That said I havn't looked at that diagram in quite a while.

__________________

90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start

90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff