Quote:
Originally Posted by lutzTD
I would also like to see a picture. there are a few issues that will make the job not suited for a mill, if you have sharp inside corners or some other features that make milling difficult or drive the mill cutter too small. This is what will price you out on small jobs
|
Some of that would depend on the machine capabilities. Mainly the RPM of the spindle. Smaller cutters and text would probably need a 10K spindle or such. I have three CNC mill. One has a 10K spindle. The other two have a 9K-45K spindle. I haven't setup or programed any of them. I do have the one with the 10K spindle running.
Tom