Thread: Blower motor
View Single Post
  #3  
Old 06-08-2011, 11:13 AM
DAVECAD2.0 DAVECAD2.0 is offline
Registered User
 
Join Date: Oct 2006
Location: Indian Waters, Florida
Posts: 136
Quote:
Originally Posted by mbdoc View Post
Mounted near the brake booster on the "cardboard" firewall partition.

Black plastic housing, also check fuse #5 in the fuse box
Here's what I found. After testing the #5 fuse,fuseable link, and resistor. I removed the blower motor and found it stiff.
Removed the plastic support bracket and cleaned.
Removed the squirrel cage and cleaned.
Blew out motor with compressed air.
Sprayed the motor with contact cleaned.
Sprayed bearings with carb cleaner.
Blew out bearings.
Checked brushes about 3/8" length remaining.
Lubed each bearing 2 drops with Moble I syn.
Runs easy and smooth.
Problem solved. Just a dirty motor with end of life lube.
Had the same problem with one of my aux. fans awhile back.
Same repair procedure and its / they are still running fine.

Thanks, mbdoc.
Reply With Quote