Quote:
Originally Posted by slimak9
Ok so I believe I've been measuring everything correctly now.
I read the resistance of the wire between the signal connection at the Camshaft sensor and A2 Ground terminal (the connection that goes to A2 on the 8-pin connection to the ICM and got the resistance of 995ohms which is the "Insulation Resistance" and within spec as per ALLDATA).
|
No, the spec is more than 200 KILO ohm = 200000 ohm you reading is only 995 ohm. Are you sure it's not 995 kOhm?
Quote:
Originally Posted by slimak9
myarmar,
The resistance for the wire from the CPS to where it connects at the ICM is 0.40hms on both signal and ground. This seams normal?
|
Yes