|
Since I have stuff like tractors I can not take to a car wash....and would not wash an engine with high pressure if it had any kind of computer exposed ( some have them in the inside )...
AND since I want to be cheap and safe ( not use gasoline or brake cleaner )....
I get a gallon can of Gunk Concentrate...
and mix that with Kerosene ( as per the Gunk instructions ) ..... four gallons of Kero to that one of Gunk Concentrate.... this is cheap... works great.... very low in flammability .... spray on , leave as long as possible.. overnight, whatever.... then spray off just with water hose with thumb over end...
If not clean enough.. let dry, repeat....
There are cars which already have electrical connector issues.. like FORD for instance... and steam or high pressure putting stuff up into those types of place to corrode is something I try to avoid...
|