|
The main variation seems to be when to start holding the button (as opposed to pressing it a couple times).
The official instruction say to turn the ignition switch to off (after calling up the FSS), THEN hold the button down and turn the key back to ON.
What usually worked best for me, is to call up FSS, THEN hold the button down, then turn the ignition to OFF (keep holding the button down), then back to ON and wait the 10 or so seconds.
Try it both ways, but be sure the door switch is working, had a few of them we couldn't reset and trouble was found to be the door switch. Especially in a case like yours where the dome is switched off, you wouldn't know if the switch is bad or not if it is switched off. One would wonder why it is switched off to begin with, probably because the switch is broke! Just sayin.......
|