1.Measure your old Condenser(Record the measurements!)
2.Select the New Parallel Flow Condenser that will FIT.
[Your Due Diligence in comparing the New Parallel Flow Condenser's Capacity
to the Old Condenser's Capacity will tell you if you're "Chasing the Dragon"]
3.Take Both OLD and New Condensers (AND the Hoses to be replaced)
to the Hydraulic Shop.So they can "SEE" the extra amount of Hose needed and
the Fittings to "Make Up" the New configuration.
(They'll use your old fittings and New "Barrier" type hose to make new ones.)

You'll have to McGuiver the fittings and Rubber Bumpers to secure the New
Condenser into the Old One's Slot.

__________________
'84 300SD sold
124.128