View Single Post
  #7  
Old 07-13-2011, 01:33 AM
Bob Albrecht's Avatar
Bob Albrecht Bob Albrecht is offline
Registered User
 
Join Date: Mar 2005
Location: Kennett Square, PA
Posts: 344
The fuse is gone.

Here are some pictures of the fuse and the little box it is in.

The fuse looks like it might have been corroded, but then heated up for a long time and burned through. The plastic box had a hole melted in the bottom of it.

Should I check the blower to see if it is seized-up by bypassing the fuse for a second to see if the blower turns?

I found the plastic box and wires online for about $45, but I think I am just going to plug the melted hole with some epoxy putty.
Attached Thumbnails
Blower Just Stopped-imgp5704.jpg   Blower Just Stopped-imgp5705.jpg  
__________________
1991 350SD (updated rods)
Biodiesel B100 when I can find it.
Dino when really cold outside
Reply With Quote