Quote:
Originally Posted by Diesel911
There might be another possible for you. Fast lane (the pictures are from Fast Lane special Tools for Diesel page 58).
The timing tools in the pictures go into a Plug that you remove from the side of the Governor Housing.
On my 84 I used the one in the left picture. (Note: The timing is done 15 degrees After Top Dead Center.)
You most likely need the one in the right hand picture.
It would be best if you could post a pic of your Fuel Injection Pump so I could see what type of Plug you have on the side of your Governor Housing.
|
RIV port is only avail on 84 and up MW pumps.
To the OP, there is a bit in the FSM that SOME pumps are offset by 3 teeth due to a problem from the bosch factory.