Hirnbeiss-I forgot to write that I did lay the coil & boot and the #3 wire & boot across the engine and nothing, no arcing, no sparking - completely dead.


Deanyel- I d/c the socket at the module and was trying to measure/verify continuity between coil #2 and the rest of the harness, backwards to the module. I may have a break in the wire somewhere that leads to cylinders 3 & 4. I thought (since I couldn't see a number), that I could attach one probe of the voltmeter to the coil feed and then systematically touch every single socket on the harness receptacle. I was expecting no continuity after touching every receptacle, instead I found continuity on numerous receptacles - which makes no sense at all.

__________________
Remember, Bad Decisions Make For Good Stories