Quote:
Originally Posted by Freybird
Thanks guys!
I've disconnected the door check by driving the pin out and allowing it to retract into the door; same behavior. I too thought this could be responsible for the resistance and was a little surprised to see no change.
Junkman, my wife now gets a big pass for not being too annoyed at me for this
|
make sure the hinges didnt get a small hairline crack, or even move a little bit. i dont know how fast you were going, but if the screws were a little loose, the force coulda pulled the door out of alignment. if it seems straight with the body, check the bottom hinge.