Quote:
Originally Posted by watut
Woops, I meant I plugged into 1(ground) and 16(power) in the engine bay and number 2(other color) in the passengers footwell. I have pm'd Arthur and he said you read from port 9 in the engine bay for the roll bar and CST. I got 1 flash from that port, which means no codes. 
Also had noticed, somewhere along, someone had replaced the 8AMP fuse (A) in the underhood fusebox with a 16AMP. Something fried somewhere? |
I know I read and cleared my codes from the port in the footwell. It will give you both CST and roll bar codes. From your description in this thread it sounds like one your axle switches is bad, you may be able to reset but long term sounds like it needs to be replaced. When you use the port in the footwell the codes flash on the cst switch, do you get any codes when you read from the footwell?