|
I've done it. There are a few oil pan bolt holes in the block that you have to drill out to 6mm as the bolt goes into the pan from above where the axles are. The oil pump will have be swapped. Otherwise you will also have a second dipstick, which may or may not interfere with something in the pan, I kept the 4-M stick and removed and plugged off the other.
__________________
90 300TE 4-M
Turbo 103, T3/T04E 50 trim
T04B cover .60 AR
Stage 3 turbine .63 AR
A2W I/C, 40 LB/HR
MS2E, 60-2 Direct Coil Control
3" Exh, AEM W/B O2
Underdrive Alt. and P/S Pulleys,
Vented Rear Discs, .034 Booster.
3.07 diffs 1st Gear Start
90 300CE 104.980
Milled & ported head, 10.3:1 compression
197° intake cam w/20° advancer
Tuned CIS ECU
4° ignition advance
PCS TCM2000, built 722.6
600W networked suction fan
Sportline sway bars
V8 rear subframe, Quaife ATB 3.06 diff
|