Quote:
Originally Posted by wjukes
When I followed the small line out of the pump, I came to a connector but it did not seem to be a five way. It was a cross that had the small line from the pump and three other lines - two going to the right side of the engine and one going to the left.
Additionally, the line going to the left (which was clear with a red stripe) entered a sleeve right after the connector.
Any assistance will be greatly appreciated.
Thanks.
|
The SDL typically has two lines that go to the left side of the vehicle. If yours has only one, that single line may further divide downstream.
Remove the two lines that go to the right side of the vehicle. Reconnect the vacuum pump to the single line that goes to the left side of the vehicle.
Drive it and report back with results.