View Single Post
  #1  
Old 12-09-2011, 12:43 AM
greasybenz's Avatar
greasybenz greasybenz is offline
Registered User
 
Join Date: Nov 2005
Location: San Francisco, CA
Posts: 2,082
95 S500 Limp mode "dtc code 7"

Hi havent been on the forum in years! Im having problems with my w140 hoping I can get some help.

My car is stuck in limp/asr mode. Luckily my 95 has the L.e.d. near the f23 box. It blinked "code 7" According to 'K6JRF" website it listed code 7 as 'Ignition system defective' Ive replaced spark plugs wires, checked cap and rotor they seem to be in good condition. I cleaned off whatever carbon has built up.

The car was running fine prior to it running out of gas and getting stuck into limp mode when it was restarted. My ETA is working and my maf was cleaned but with no progess. Every time I start the car it idles and isnt drivable. The ASR light is on, ive tried various ways to reset it but havent had any luck.

Thanks
__________________
Current:
05 E320 CDI
07 GL320 CDI
08 Sprinter
05 Dodge Cummins
01 Dodge Cummins

Previous
2004 E55 AMG
2002 C32 AMG (#2)
1995 E300
1978 300D
1987 300D
2002 C32 AMG(blown motor :[
1981 300SD
1983 300SD
1987 300SDL
2002 Jetta TDI
1996 S420
1995 S500
1993 190E 2.6
1992 190E 2.3
1985 190E 2.3 5-Speed
Reply With Quote