Quote:
Originally Posted by DeliveryValve
Clemson88, are you incorporating the original glove box in place of the airbag? I also have a perfect blue airbag 420SEL dash. I was was wondering if just cutting out the bottom glove box metal cross member from the old dash and attaching it to the airbag dash would work for the glove box.
And if anybody is interested, I am willing to let go the w126 dash and in addition I have a w123 cracked free blue ACCIII style dash with minor flaws.
.
|
My glove box's wood panel is delaminating so I went the other way.
I considered cutting the old dash to give a housing for the bottom of the glove box and that might have been the simple solution. If I had it to do over that is the way I would go. Right now I have the defrost vent system for the passenger window installed along with the passenger's side dash vent. Those dispense air from the front of the dash on the passenger's side.
I also have the air bag and its carrier installed and the 'trays,' just below the bag. I can not find a plastic section of vent to transport air to the vent on the passenger's side of the dash into the door. If there is such a creature I must have left it at the strip site.
Do you have a disassembled 420?