After reading everything I could find on replacing a 107 steering coupler, I decided to attack the 6mm, Allen bolt recessed under the firewall with a X-long, ball head hex socket, and ½ in drive with a long extension. However, since the torque on that bolt is evidently far greater than I imagined, I ended up stripping the head.

So, now I’m thinking about gluing a 6mm, Allen socket into the stripped head with JB Weld, and giving it a shot tomorrow. But before I do, I was wondering if anybody here has ever done this, or could speculate what the chances are that it will work. Any other suggestions on how to get the bolt out would also be appreciated.

Thanks very much in advance.